A Simple Guide to Better Understanding Fiber Optic Installation
Ease of installation is the main reason why fiber optic cables are becoming popular in this modern day and age. When it comes to other types of cables, they are too complicated and heavy to establish some connection. Fortunately, fiber optic cables have come into the picture being the easiest to install and the lightest and most flexible cable there is. The process of installing fiber optic cables is more or less the same as installing other wire cables. What make fiber optic cable installation different, however, are the method, instruments, and tools that will be used to finish the entire process.
When it comes to the installation of fiber optic cables, you can choose between different methods of them. Such cables are being installed for the purpose of outdoor underground or indoor underwater applications. There is no rule of thumb when it comes to the installation of fiber optic cables due to the fact that there are now various applications and cable types for them. But then, just like any other cable that needs installing, fiber optic cables are installed in more or less the same installation principles. To discover more about these guidelines, make sure to view here for more. Despite the fact that data cable installations and network cable installations are best done by the professionals, it will be to your advantage if you know even some basics about the entire process.
Site survey: This is the first step to proper fiber optic installation in order for the location to be properly identified along with its special needs. This process also helps you find out what environmental and physical hazards are out there. Surveying the site also aids in being able to make a good plan on the placement of the machinery as well as the route of the cables. This is most especially necessary for fiber optic installation in spas and pools.
Cable stretching plan: Before any cable must be installed, planning of splice settings, access point and junction locations, and cable pulling equipment requirements must be determined. In case of lightning, you should have a complete system installed with your choice of fiber type whether it be side glow or end glow.
Avoid twisting cables and exceed its bend radius: When you twist your fiber optic cables, you are putting a limit to its efficiency because of the stress that you are putting to it. See to it that you do not practice this one when you are applying your cables for lightning. Moreover, so as to avoid breaking your fiber optic cables and damaging them, never exceed beyond their bend radius. Compared with the diameter of your cable, your bend radius must be twenty times smaller. Also, do not forget to have its final installation bend in comparison to the diameter to be ten times smaller for your cable.